PCA SM & OS Series Sump Pump Controllers are designed to meet all market requirements, from PLC/HMI to conventional switch and LED indication, there is a PCA Sump Pump Controller to meet your needs.

enquire about our products

PLC/HMI Single, Dual & Triplex Sump Pump Controllers -

240VAC 0.4kW - 2.2kW DOL

415VAC 0.75kW - 11kW DOL (larger on request)

SM1001 240VAC & SM1003 415VAC

Control Panel Overview

The Control panel controls the operation of 1, 2 or 3 mains powered submersible pumps with the use of control float switches or level sensor. The panel is manufactured to comply with all Australian Standards.

Controller can control level via 2 options - Level Control Float Switch or Level Sensor operation. User defined within operating parameters accessed via the front HMI.

The front of the control panel houses an HMI/PLC Controller with control buttons and indication allowing the operator to view pump/system operation & alarm conditions.

o Power Indication: Power on Indicated by the HMI screen illumination.

o Sump Level- Indicated when the sump is at high level.

o Pump No1 Run - Indicated when Pump No1 is running.

o Pump No1 TOL Fault - Indicated when Pump No1 has failed via overload.

o Pump No2 Run - Indicated when Pump No2 is running.

o Pump No2 TOL Fault - Indicated when Pump No2 has failed via overload.

o Common Fault Free BMS Contact as standard.

PLC with lamp and switch control Dual & Triplex Sump Pump Controllers -

240VAC - 0.4kw - 11kw DOL

415VAC 0.75kW - 11kW DOL (larger on request)

OS1001 240VAC & OS003 415VAC

Control Panel Overview

The Control panel controls the operation of 2-of mains powered submersible pumps with the use of control float switches. The panel is manufactured to comply with Australian Standards.

Control via Level Control Float Switch.

The front of the control panel houses a control switches and LED Indicators controlled via PLC for all Automatic and alarm conditions.

o Power Indication: Power on Indicated by “Power On” LED

o Sump Level- Indicated when the sump is at high level.

o Pump No1 Run - Indicated when Pump No1 is running.

o Pump No1 TOL Fault - Indicated when Pump No1 has failed via overload.

o Pump No2 Run - Indicated when Pump No2 is running.

o Pump No2 TOL Fault - Indicated when Pump No2 has failed via overload.

o Common Fault Free BMS Contact as standard.